How to Flash Stock Rom using Smart Phone Flash Tool

How to Flash Stock Rom using Smart Phone Flash Tool

324 0

These are the tutorials to Flash Stock Rom or any custom rom using Smart Phone Flash Tool (SP Flash Tool) on any Windows Computer.

Requirements: Your Android Smartphone should have at least 40-50%  (percent) of battery to perform the Flashing Full Process.
How to Flash Stock Rom using Smart Phone Flash Tool 

Step 1: First Download and install Android USB Driver on your computer. if Android USB Drivers are already installed to your Computer then skip this step.

Step 2: Power Off your Android Device and remove the Battery,SD Card and Sim/RIM Card (if it is removable).

Android Power Off

Step 3: Download the Custom Rom or Stock Rom that you want to Flash on your Android Smartphone and extract it to your Computer.

Step 4: Download and Extract Smart Phone Flash Tool (SP Flash Tool) on Your Computer. After Extracting you will be able to see the following those files:


Step 5: Now Open Flash_tool.exe File.


Step 6: Once Smart Phone Flash Tool is launched, you will be able to see Scatter-loadingButton .

Sp Flash Tool

Step 7: In the Download Tab, Click on the scatter-loading button.

Scatter Loading Button

Step 8: Now, Find the Scatter File  (Note: you will find the scatter file in the Stock rom folder).

Scatter file

Step 9: Now, Click on the Download Button to start the Flashing Process.

Flash Tools Download

Step 10: After that Press Volume Down or Volume Up key and connect your Device to Computer Using USB Data Cable. (without battery- if it is removable. Some Device need battery to start Flash Process ). Now Flash tools start Flash process and wait while flashing .

Step 11: Once Flashing is completed, a Green Ring will appear on screen .

Green Ring Appear on screen

Step 12: Close the Flash Tool and disconnect your Device from the computer.Now Power On your device . This may take Few Minute to Power On the Device. Enjoy !!


Related Post